Open the TFTP service on your PC and enable TFTP client on Windows. So I have opted to reflash it with another firmware using TFTP Ive set up the hikvision TFTP server, and can get it to connect and start the download, but it just seems to repeat: 16:21:57 TFTP server 192.0.0.128 initialized 16:23:30 Device192.0.0. Mv /srv/tftp/tplink.cfg /backups/devices/tplink/`date +%Y-%m-%d`_tplink. check, stop bit 1, and the right side flow control is not selected at all. #!/bin/bashĮcho "copy startup-config tftp ip-address 192.168.0.5 filename tplink" You can also make a copy of all the files in the cloud every month.Īs you can see, before entering a password in the script, you can not pause. The camera is connected to a PC running windows 10 through a switch and powered by external 12 Volts. ![]() I figured I would re-install the brickfixv2 firmare via Hikvision tftp but no joy. I ran the Hikvision TFTP server with all recommendations of firewall off blah blah. The script runs on Linux where the TFTP server is running, it is connected via telnet to the switch and the configuration command is sent to the specified TFTP, when the telnet connection is closed, the file is moved to the desired directory, and the last command deletes files longer than 30 days, as more of them I do not need to store. I was able to install digicap.dav using the Hikvision TFTP but when I booted up the cam I am unable to connect via putty (I am using telnet). The TFTP server is very simple but appears to be good enough. ![]() How to reflash the firmware on Hikvision cameras. I wrote a script for backup configuration of TP-Link switches. This script handles both the handshake and the actual TFTP transfer. TFTP server and TFTP client, which implements TFTP according to RFC1350.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |